In this post we’ll talk briefly about Monad Transformers. Chapter 18 from the Real World Haskell inspired this, but as usual, it was a bit hard for me to digest. The best source so far for this subject was the Haskell wiki [1].

In a high-level, monad transformers are monads generated by combining monads into a new one (thus transforming monads in monads).

Intuitively, it does so by using the analogy of wrapping, as we have for Monads, but monad transformers wraps monads inside monads. Thus, Dan Piponi makes an analogy of onion layers [3]. The idea of transformers is to avoid boilerplate in common scenarios where two monads are used in conjunction.

We’ll present some monad transformers, all follow the pattern where two monads are combined, the first one is fixed, and the other is generic. The fixed monads are `Maybe`

, `List`

and `State`

and their correspondent transformers are called `MaybeT`

, `ListT`

and `StateT`

, respectively. The `Writer`

and `Read`

monads also have corresponding transformers, but we’re not talking about them here.

As in [1], we’ll be more detailed in describing the `MaybeT`

which is the simplest of our examples, and for the other two, we’ll limit ourselves to the definition and a brief explanation.

### The MaybeT monad

Let’s start by recapping the Maybe monad, as seen in a previous post.

#### Review of the Maybe monad

The Maybe data type can be defined as follows:

data Maybe a = Nothing | Just a deriving (Show)

The implementation of the monad interface is the following:

instance Monad Maybe where return = Just Just x >>= f = f x Nothing >>= f = Nothing

Remembering, `return`

wraps an element in the monad and `>>=`

is the bind operator, which takes an element wrapped in a monad, extracts it, applies a function `f`

, which returns another element wrapped in the monad.

#### The MaybeT data type

Monads can contain other monads and one particular useful combination is of a monad containing the Maybe monad. While we can accomplish that by regular use of monads, we can also avoid some boilerplate code by having a special type that encodes this combination, in this case the `MaybeT`

data type.

We can think of `MaybeT`

data type as a 3-layer wrapping. The inner layer being the `Maybe`

monad, then a generic monad and then the actual `MaybeT`

wrapper.

newtype MaybeT m a = MaybeT { runMaybeT :: m (Maybe a) }

#### MaybeT is a Monad

MaybeT is also a monad. One possible implementation is:

instance Monad m => Monad (MaybeT m) where return = MaybeT . return . Just x >>= f = MaybeT $ do maybe_value <- runMaybeT x bindOfMaybe f maybe_value bindOfMaybe f maybe_value = case maybe_value of Nothing -> return Nothing Just value -> runMaybeT $ f value

Let’s break in parts:

(1) `return = MaybeT . return . Just`

The first part is `Just`

, which encapsulates the inner element in the `Maybe`

monad. The second `return`

encapsulates in the generic monad `m`

and finally we encapsulate in the `MaybeT`

monad.

(2)

x >>= f = MaybeT $ do maybe_value <- runMaybeT x bindOfMaybe f maybe_value

The type signature is given by:

`(>>=) :: MaybeT m a -> (a -> MaybeT m b) -> MaybeT m b`

The bind operation has to do the opposite operation first, that is,

de-encapsulate the three layers of monads before running `f`

on it.

Then, we need to encapsulate into `Maybe`

, `m`

and `MaybeT`

again

Alternatively, we can use the chained notation:

x >>= f = MaybeT $ runMaybeT x >>= \maybe_value -> bindOfMaybe f maybe_value

### The ListT monad

Let’s review the list `[]`

monad, as we saw in a previous post.

instance Monad [] where return x = [x] xs >>= f = let yss = map f xs in concat yss

The idea is very similar to the `Maybe`

monad, we wrap the list in two other layers, the intermediate one being a generic monad. The implementation of the monad class type is essentially the same, except that, again, we have to do extra wraps and unwraps:

newtype ListT m a = ListT { runListT :: m [a] } instance (Monad m) => Monad (ListT m) where return x = ListT $ return [x] tm >>= f = ListT $ do xs <- runListT tm yss <- mapM (runListT . f) xs return (concat yss) -- Alternatively -- tm >>= f = ListT $ runListT tm -- >>= \xs -> mapM (runListT . f) xs -- >>= \yss -> return (concat yss)

### The StateT monad

We’ve talked about the State monad before. It can be defined in the following way:

newtype State s a = State { runState :: (s -> (a,s)) }

And the monad implementation is given by:

instance Monad (State s) where return a = State $ \s -> (a,s) (State x) >>= f = State $ \s -> let (v,s') = x s in runState (f v) s'

The idea of combining it with another generic monad and wrapping it, leads to a analogous idea to the `List`

/`ListT`

classes. Let’s define the `StateT`

class:

newtype StateT s m a = StateT { runStateT :: (s -> m (a,s)) }

In this case, the generic monad wraps the result of the previous function `s -> (a, s)`

. The monad implementation is similar to the `State`

one, except that we have to take into account the extra layer:

instance (Monad m) => Monad (StateT s m) where return a = StateT $ \s -> return (a,s) (StateT x) >>= f = StateT $ \s -> do (v,s') <- x s runStateT (f v) s'

For the return definition, we wrap `(a, s)`

in using the `m`

monad, by the use of return function of `m`

.

The bind operator, `x`

applied to `s`

will return `m (a, s)`

. We extract if from m by using the `<-`

operator and then run the function on `a`

, but since `(f v)`

returns the result wrapped in `StateT`

, we need to extract it using `runStateT`

, and finally wrap into `m`

again and then into `StateT`

.

### The MonadTrans interface

All the monad transformers can implement the `MonadTrans`

interface, which basically defines the function `lift`

.

ghci> :m +Control.Monad.Trans ghci> :info MonadTrans class MonadTrans t where lift :: (Monad m) => m a -> t m a -- Defined in Control.Monad.Trans

Lift is a generic version of `liftM`

, in a sense it allows a function that only applies to the inner element to be applicable to the top-level monad. The implementation of the `MaybeT`

monad is the following:

instance MonadTrans MaybeT where lift = MaybeT . (liftM Just)

### Stack of monads

After understand better the concept of Monad transformers, Chapter 18 from Real World Haskell [2] becomes easier to digest and it’s quite interesting.

At one point, it discusses the real power of combining multiple monad transformers (for example, the generic monad in `MaybeT`

could be another monad transformer, say `WriterT`

). This “equips” a given data type with traits corresponding to the underlying monads (in the example the optional nature of `Maybe`

and the logging capabilities of the `Writer`

monad).

### References

[1] Wikibooks: Haskell/Monad

[2] Real World Haskell: Chapter 18. Monad transformers

[3] A Neighborhood of Infinity: Grok Haskell Monad Transformers

nice photo of onions :)